CYBER SALE WEEK - NOW ON!
days
hrs
:
min
:
sec
0800 634 4484
Mon-Fri 9am-6pm  |  Sat 9am-5.30pm
Denon AVR-X3200W w/ Monitor Audio Bronze 5 (5.1)
1590.0000

Denon AVR-X3200W w/ Monitor Audio Bronze 5 (5.1)

Denon AVR-X3200W w/ Monitor Audio Bronze 5 (5.1) Speaker Package.
Share:

EAN: 4951035056684

Man. Part No.: AVR-X3200W

  • Black Oak
  • Rosemah
  • Walnut
  • White Ash

Denon AVR-X3200W w/ Monitor Audio Bronze 5 (5.1)

Denon AVR-X2200W w/ Monitor Audio Bronze 5 (5.1)

Denon AVR-X3200W AV Receiver

 

Overview

- 180W x 7ch high quality discrete power amplifier for powerful and detailed sound
- Built-in WiFi with dual diversity antenna, built-in Bluetooth 
- Built-in Dolby Atmos (up to 5.1.2); DTS:X ready (via firmware update later in 2015)
- Latest HDMI standard with 4K/60Hz full-rate pass-through on all inputs, 
- 4:4:4 resolution, HDR, BT2020
- 8 HDMI inputs (1x front) and 2 HDMI outputs with full HDCP 2.2 support 
- Advanced Video Processing with scaling of lower resolution signals up to 1080p and 4k Ultra HD
- Wide support for streaming formats including high resolution DSD, FLAC and AIFF
- AirPlay and DLNA music streaming; Spotify Connect (where available); Internet Radio
- Audyssey MultEQ XT with Audyssey Dynamic Volume and Dynamic EQ
- Setup Assistant in 9 languages; Easy to setup, easy to use
- Advanced ECO mode with off/on/auto setting

 

Discover the thrilling world of immersive surround sound with the Denon AVR-X3200W A/V receiver, which features Dolby Atmos surround decoding for the ultimate home theater experience with today's blockbuster movie soundtracks. Additionally, with a firmware update (available later in 2015), the AVR-X3200W will decode forthcoming DTS:X immersive surround soundtracks. Both Dolby Atmos and DTS:X feature object-based surround sound with the ability to drive overhead speakers to deliver the ultimate immersive 3D audio experience. The advanced video section features full 4K Ultra HD connectivity along with HDCP 2.2 compliance.

Full wireless connectivity is provided by both Wi-Fi and Bluetooth with dual diversity antennas for the most robust signal handling. This lets you stream your favourite tracks from streaming services including Pandora, SiriusXM and Spotify Connect, listen to thousands of internet radio stations, and stream from your favorite iOS device via AirPlay.

Featuring a powerful 7 channel amp section, the AVR-X3200W delivers 105 watts per channel with identical amplifier construction on all channels. The AVR-X3200W also features multi-room capability, so you can enjoy 2 different sources in different rooms at the same time.

 

Dolby Atmos Built-In; DTS:X Ready


Dolby's new Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the sound designer the ability to precisely place sounds anywhere in the 3-dimensional space. Now, you can enjoy this same award-winning technology at home with the AVR-X3200W, which features the ability to connect a 5.1 surround sound speaker system, and 2 additional overhead speakers, or 2 additional Dolby Atmos elevation speakers, for the ultimate home theater experience. Along with Dolby Atmos decoding and Dolby Surround Upmixing, the AVR-X3200W also features Dolby TrueHD lossless decoding and other Dolby Digital technologies.

The latest immersive surround sound format, DTS:X, features object-based audio coding that lets the sound designer place sonic elements anywhere in the 3D acoustic soundspace, and provides for overhead speakers to deliver a stunning surround sound experience. The AVR-X3200W also features DTS-HD Master Audio and other DTS technologies. DTS:X and DTS Neural:X Upmixer will be enabled through an online firmware update coming later in 2015. For more info, please visit www.denon.com/dtsx.

Built-in Bluetooth & Wi-Fi; Music Streaming; AirPlay

Featuring Bluetooth & Wi-Fi wireless streaming connectivity, the AVR-X3200W is equipped with an advanced dual diversity antenna transceiver system for robust and error-free streaming, even in congested RF environments. Connect to the internet through your home Wi-Fi network (or with a hard-wired connection via the RJ-45 Ethernet LAN port) and enjoy your favourite tracks from streaming music services such as Pandora, Sirius XM and Spotify Connect, as well as from thousands of internet radio stations around the world.

With AirPlay, you can enjoy listing to your favourite tracks wirelessly from your favorite iOS device, including the iPod touch, iPhone and iPad. The AVR-X3200W is also DLNA 1.5 certified for compatibility with your home PC or Mac.

The Denon AVR Remote App lets you easily control the AVR-X3200W with your favourite portable device, and it's available for both iOS and Android devices

Advanced Quad-Core 32-bit DSP Processor

Powered an advanced quad-core 32-bit DSP processor, the AVR-X3200W easily handles multi-thread processing tasks, including Dolby Atmos and DTS:X decoding, Audyssey MultEQ XT room acoustic correction, bass management and DSP surround simulation. The processor features tremendous computing power, with 4 300-MHz DSP cores, that process over 1 billion operations per second.

Smart TV Connectivity

Via the HDMI CEC (consumer electronics control) functionality in your Smart TV, you may be able to control your Denon AVR with the Smart TV's remote control. With “HDMI control” set to ON on your receiver, you can set “Smart Menu” to ON to start controlling your Denon AVR with your Smart TV's remote. The Smart Menu home screen provides you quick access to source and surround mode selections, the AVR’s setup menu, and 4 Quick Selects.
 

Latest HDMI 2.0a Connectivity;

HDCP 2.2 Compatible; ISF-Certified

Prepared for the future, the AVR-X3200W features an advanced video section that's fully compatible with the latest HDMI 2.0a and HDCP 2.2 specifications on all 8 HDMI inputs. With 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub-sampling, High Dynamic Range (HDR) and 21:9 video, 3D, and BT.2020 pass-through support on every input, the AVR-X3200W is ready for the next generation of Blu-ray disc players, set-top boxes and other 4K Ultra HD sources.

The video processor also has the ability to transcode and upconvert standard definition and high definition analog and digital video content to 4K Ultra HD, breathing new life into your favourite legacy sources.

In addition to being certified by the Imaging Science Foundation, the AVR-X3200W features a full suite of video calibration controls (for use by an ISF technician), along with ISF Day and ISF Night video modes.
 

Powerful 7 Channel Discrete

Amplifier with Eco Mode

Rated at 105 watts per channel (20Hz~20kHz, .08%THD, 8 ohms), the AVR-X3200W features identical amp construction across all 7 channels, with high current discrete power devices along with compatibility with lower impedance 4 ohm speakers.

The advanced Eco mode features an Auto setting that configures the amp section for optimum power output efficiency, saving energy while delivering a powerful listening experience.
 

Easy To Setup, Easy To Use

Via our exclusive Setup Assistant along with the Quick Start guide, you can connect and configure the AVR-X3200W quickly and easily. The Setup Assistant guides you through the process via clear on-screen graphics and text, optimising critical system settings for the best possible sound quality with your particular equipment configuration.

Audyssey Silver DSP Suite

Denon was the first A/V receiver manufacturer to embrace Audyssey's advanced DSP audio algorithms, and we've introduced the most Audyssey-equipped components ever since. The AVR-X3200W features the Audyssey Silver suite of DSP functions, which includes MultEQ XT, Dynamic EQ and Dynamic Volume.

Audyssey MultEQ XT automatic room acoustic measurement and correction system measures and then matches, your speakers to your room's acoustics for the smoothest, most natural tonal balance. MultEQ XT provides greater filter precision for the main and satellite speakers, with 8 times the resolution compared to the base MultEQ system, at up to 8 measurement locations.

Audyssey Dynamic EQ uses advanced psychoacoustic algorithms to continually adjust tonal balance so that the sound you hear is full range, even at lower volume levels, Audyssey Dynamic Volume even smoothes out annoying volume jumps, especially with loud commercials.

Multi-Source/Multi-room

Enjoy 1 source in the main room, and listen to another source in another room. You have the option of connecting a pair of stereo speakers to 2 of the available amplifier channels for powered 2nd zone listening, or you can connect the 2nd zone via stereo pre-amp outputs. You can also connect the 2nd zone via HDMI, as the AVR-X3200W features dual HDMI outputs.

Dual Subwoofer Outputs

With a single subwoofer, the frequency response in the deep bass range is very often dramatically different in various parts of the room, due to room modes and resonances. By connecting 2 subwoofers and positioning them in different spots, you'll enjoy superior bass response with more accurate tonal balance, due to response averaging anywhere in the room.

Colour Coded 4-Way Speaker Terminals

The high quality speaker terminals feature multi-way connection capability to handle a number of speaker cable terminations, including banana plugs. They're also colour coded for correct hookup the very first time and colour coded speaker cable labels are included.

Easy To Use Quick Select Functions

The AVR-X3200W features 4 Quick Select function buttons on the front panel, and on the ergonomic remote control, that let you get to your favourite sources quickly, and the Quick Select function remembers your preferred audio settings for each one.

Convenient USB Port

The convenient USB port on the front panel lets you stream tunes directly from your iPod touch, iPhone and iPad and charge your device at the same time.

You can also connect a USB drive and listen to MP3 and WAV files, and the AVR-X3200W features high resolution audio file compatibility, including DSD (2.8 MHz) and FLAC lossless decoding up to 24-bit/192-kHz.

Denon HEOS Link IP Control

Denon's acclaimed HEOS whole home audio system features advanced multi-room, multi-source audio streaming, and the AVR-X3200W features IP control capability with the HEOS Link, so you can control the receiver with the HEOS app.

External Control Capabilities

As part of Denon's IN·Command series of custom integration friendly A/V components, the AVR-X3200W is equipped with a range of features that provide enhanced control capabilities and compatibility with 3rd party and custom integration solutions.

For remote control compatibility with other components in your home theater system, the AVR-X3200W features an IR (infrared) remote control input and output on the rear panel, along with a 12V trigger output.

The AVR-X3200W can also be set up and operated by a home computer on the network via IP control, either via wired LAN connection or via Wi-Fi wireless connection. For direct connection to external home automation and control equipment, the AVR-X3200W is equipped with an RS-232C serial port.

The AVR-X3200W also features Control4 SDDP (Simple Device Detection Protocol) and Crestron Connected certification for quick and easy integration with Control4 and Crestron home automation equipment

Monitor Audio Bronze 5 (5.1)



Monitor Audio has taken a previous Award-winning package and raised the bar for its rivals
- WHF

Monitor Audio Bronze 5 AV Package (5.1)

New Bronze: Purity and Precision for the Price of an Ordinary Speaker


Monitor Audio’s story is intertwined with the evolution of our world-famous speaker lines. Driven by top-down innovation and ever more accurate acoustic analysis, each generation has grown in capability, achieving award-winning levels of quality, performance and value with every introduction. Our restless desire for the most blissful combination of great sound and design at all price points, demands that where possible we share the tech across ranges so that driver designs and analytic tools developed upstream serve to enhance ranges further down. For example this allows the New Gold series to benefit from a version of Platinum’s extraordinary C-CAM® ribbon tweeter; for Silver to inherit Gold’s ‘dished’ C-CAM driver designs, and similarly for New Bronze to absorb the latest refinements in tweeter and driver engineering from the Silver project. In many ways New Bronze has everything to gain from Monitor Audio’s dynamic forty-year design heritage. Enriched as it is with elements of Platinum, Gold and Silver, the brilliant New Bronze series will transcend the expectations of its price class and eclipse even its venerated multi-award winning predecessor Bronze BX.


New Generation, Different Class


Our latest champion moves up a gear from BX and rival budget speakers because New Bronze is simply in a class of its own. The features speak for themselves. For the first time we’re using spectacular steel-grey C-CAM driver cones for a seamless blend with finishes, available in a choice of Black Oak, Walnut, Rosemah and a new White Ash. Invisible driver fixings and floating magnetic grilles add to the impression of streamlined sophistication, lending new Bronze the look and feel of a premium range. It sounds like one as well. Drawing on our flagship technologies we’ve over-engineered the acoustic design to deliver lower distortion and a wider
response from seven beautifully matched, deceptively slender models. Combined for natural full-range music and home cinema sound, New Bronze will transform the quality of your home entertainment at a price that won’t break the bank.

Design for Sound


New Bronze Drivers


All new C-CAM driver configurations give New Bronze the tonal accuracy and consistency of a class leader. Harnessing driver technology developed
for our acclaimed mid-market Silver models, New Bronze explodes the myth that high power handling with low distortion belongs exclusively to the expensive world of audiophile design. The proprietary bass and mid drivers responsible for Bronze’s open, expressive and naturally rhythmic quality utilise a new type of ‘dished’ C-CAM cone, which employs the entire cone surface to radiate sound. Unbroken by the centre pole-piece aperture of conventional driver designs, the cone is inherently more rigid and efficient while being less prone to break-up under high drive conditions, resulting in exceptional detail resolution and life-like tonality. Ingeniously, the driver’s voice coil is thermally coupled to the back of the cone, which draws heat away from the coil for better power handling and optimal operation at all volume levels. Above the drivers, a new 25mm C-CAM Gold Dome tweeter extends each system’s frequency response to an ultra-sonic 30kHz, allowing the full reproduction of harmonic frequencies vital to the accurate reproduction of, say, the decay of a piano string or the crash of a hi-hat. Within the New Bronze tweeter, an innovative venting system allows air to flow outside the tweeter’s magnet assembly into a rear loading chamber, preventing air from being compressed at the back of the dome for lower distortion, reduced mechanical resonance, and improved damping. Structural improvements in dome geometry and drive mechanism have boosted accuracy and extension at the top end of the tweeter’s range as well, generating the extraordinary high frequency quality that helps to define the sound of new Bronze.


New Bronze System Features


Enhancing system performance is our ‘bolt-through’ driver mounting design, first devised for our Radius Series models but now adopted by all our speaker ranges. The drivers are individually mounted on a through-bolt which fixes at the back of the cabinet and tensions the driver at the front. Cleverly this triple-action feature braces the cabinet structure for lower box colouration while removing the need for conventional front fixings, reducing unwanted driver/cabinet resonance and simultaneously boosting aesthetics. The reflex loading found on all New Bronze models (excluding Centre, FX and W10) is of the HiVe®II variety, borrowed from the Gold range, which uses rifled port grooves to speed the air in and out of the cabinet for cleaner, more powerful bass and a superior transient response. Best possible signal integrity through the crossover is supplied by polypropylene film capacitors, air core and laminated steel core inductors. With slightly higher overall impedance than their BX predecessors, the New Bronze line-up offers superior system-building flexibility with a wider choice of partnering equipment.


The New Bronze Range

 

New Bronze Five

Monitor Audio Bronze 5 Speakers

The slender Bronze Five delivers powerful, responsive bass lines that belie its stealthy appearance and surpass those of many much larger towers. Its 5½” C-CAM bass driver and 5½” C-CAM bass/mid driver are arranged in a two and half way system configuration, operating in separate acoustic chambers with front and rear firing HiVe II ports to provide differential tuning for higher efficiency and greater low frequency extension. The Bronze Five’s low-distortion architecture expertly combines clean, expressive mid and high frequencies with punchy room-filling bass lines delivering a naturally rhythmic and addictive blend of large-scale dynamics and detail from a surprisingly unobtrusive tower.


- New C-CAM gold dome tweeter
- 5½” bass driver and 5½” bass/mid-range with concave ‘dished’ C-CAM cone profiles
- Two-and-a-half way configuration with differentially-tuned acoustic system for higher efficiency and improved low frequency extension
- HiVe II port technology
- Single bolt-through driver systems for increased overall bracing, rigidity and driver/baffle de-coupling
- High quality crossovers with premium grade Polypropylene film capacitors used throughout
- Rigid 18mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration
- Invisible magnetic grille fixing
- Floor-level terminal panel for easy termination and neat cable access. Bi-wire/ Bi-amp terminal configuration
- Premium quality vinyl veneer finishes.

 

New Bronze Centre

Monitor Audio Bronze Centre Speaker

By sharing the New Bronze acoustic and aesthetic design ethos, the compact Bronze Centre is the natural partner for Bronze left/right speakers in a home theatre LCR array. It features twin 5½” C-CAM bass/mid-range drivers straddling a Bronze C-CAM tweeter for pin-point synergy with its satellite partners producing seamless front soundstage action and articulate dialogue.


- New C-CAM gold dome tweeter
- Dual 5½” bass/midrange drivers with concave ‘dished’ C-CAM cone profile
- Two-way M-T-M (D’Appolito) configuration in a sealed cabinet for accurate performance close to a wall or in restricted voids
- Single bolt-through driver systems, for increased overall bracing, rigidity and driver/baffle de-coupling
- High quality crossovers with premium grade Polypropylene film capacitors used throughout
- Rigid 18mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration
- Invisible magnetic grille fixing
- Acoustically matched to Bronze speaker systems for excellent imaging and consistency of timbre in surround applications
- Premium quality vinyl veneer finishes.

 

New Bronze FX

Monitor Audio Bronze FX Speaker

Developing the perfect mix of reverberant or direct surround sound in a Bronze home cinema system, the wall-hugging New Bronze FX surround speaker will combine seamlessly with front channels to establish the immersive audio experience essential to successful home theatre design. Matched acoustically and aesthetically with its LCR counterparts, its angled-baffle cabinet can be flush-mounted on side or rear walls, and its dispersion characteristics changed at the flick of a switch to accommodate the precise requirements for di-pole (diffuse) or bi-pole (direct) operation. Flanking a single 5½” C-CAM bass/mid driver, dual C-CAM gold dome tweeters are mounted on angled side-panels, helping to create a wider, more enveloping and convincing surround sound-field.


- Angled baffles to create a wider spread of sound for improved surround effects
- Optimised for di-pole or bi-pole operation by the simple flick of a switch located on the rear terminal panel
- New C-CAM gold dome tweeter design
- 5½” bass/mid-range driver with concave ‘dished’ C-CAM cone profile
- Single bolt-through driver system, for increased overall bracing and rigidity
- High quality crossovers with premium grade Polypropylene film capacitors used throughout
- Acoustically matched with all other Bronze speakers for excellent imaging and timbre consistency in surround applications.

 

New Bronze ‘W10’ Subwoofer

Monitor Audio Bronze W10 Subwoofer

All the audiophile-like transparency of New Bronze’s low-distortion design regimen concentrated in the bass domain. This is New Bronze bass, deeply provisioned, authentically proportioned and dynamically fleet of foot, re-tooled from the ground up to punctuate the sound of every New Bronze system with stunningly natural bass transients, timed to perfection. The sophisticated W10 subwoofer is a New Bronze original, featuring an exclusive trinity of uprated amplifier topology, powerful DSP processing and new long-throw driver design. Advanced switch-mode power conversion techniques, custom DSP tuning and a massive power reservoir combine to generate enormous dynamic headroom from the Class D power-pack, allowing the driver to drop low and punch hard without distortion for a truly sensational deep bass experience. A down-firing 10” ABR (Auxiliary Bass Radiator) ensures that with the same compact footprint as its predecessor, the W10 delivers an incredible 6dB greater SPL at 40Hz. Choose how you enjoy the W10’s prodigious bass energy with pre-set EQ settings for music, movie or impact.


- Ultra long throw 10” driver featuring concave ‘dished’ C-CAM cone. Increase magnet motor size to deliver higher output and improved control
- 10” flat panel ABR(auxiliary bass driver) mounted on the bottom to augment low frequency extension and power handling
- Powerful Class-D Amplifier delivering over 200W with low distortion
- Switch Mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
- DSP processing with all control features and crossover performed in the digital domain
- Three pre-set EQ mode settings (Music, Movie, Impact)
- 12volt trigger - provides switching control from AV amp, processor or home automation control system
- 18mm thick MDF construction
- Heavy cabinet bracing applied to provide stiff, low resonance cabinet
- Premium quality vinyl veneer finishes.

Additional Information

Promotion No
Manufacturer's Part No. AVR-X3200W
EAN 4951035056684
Amplifier Brand Denon
Amplifier Award No
HDMI In 8
HDMI Out 2
Amplifier Power 210
Number of channels 7,2
Dolby Atmos Yes
DTS: X Yes
Video Upscaling Yes
Connections Analog, Bi-Wire, Component, Composite, Digital Coaxial, Digital Optical (TOSLINK), Ethernet, FM/AM, HDMI, Headphone, S-Video, Subwoofer, USB
Features 4K Passthrough, Airplay, Audio Return Channel (ARC), Automatic Speaker Calibration, Bi-Wire, Bluetooth (In-Built), Digital Optical, DLNA, Dolby Atmos, DTS:X, Dynamic Volume Control, Ethernet, FM/AM, InstaPrevue, Internet Radio, MHL, Network (Internet), Remote Control App, USB, WiFi (In-Built)
Speaker Type Floorstander
Number of Drivers N/A
Multi-Room Zones 2
Speaker Dimensions (H x W x D) Fronts: 850 x 165 x 248mm/Rears: 274 x 276 x 104mm/Centre: 165 x 460 x 165mm/Subwoofer: 320 x 320 x 330mm
Speaker Award 5Star, WHF Award Winner 2015/16
Amplifier Dimensions W x D x H): 434 x 388 x 167 mm
Warranty Amplifier:2/Speakers: 5/Subwoofer: 2 yrs
Model AVR-X3200W
you may also like...

Finance options* to help you afford the product you want!

If your order value is £389.00 or over you will be given the option to buy on finance when you reach the checkout. We have two finance options available:

Buy Now Pay 6 Months Later
Buy Now Pay 12 Months Later

 

Please Note: A minimum 10% deposit is payable up front on credit or debit card on all finance orders.

How to Apply

Applying for finance is simple. All you need to do is call us on 0800 634 4484 during opening hours and we will be able to process your order.

Who is the finance agreement with?

The finance agreement is with Hitachi Consumer Credit, one of the largest money lenders in the UK.

*Finance is available to UK applicants 18 years of age or older and subject to status. Finance is not available for business customers. Prices are correct at time of going to press and are subject to change during the term of this offer without notice. Terms and conditions are available on request. Finance agreements are available on orders between  £389 and £10,000 (including VAT and shipping). Please ensure you are able to keep up repayments of any finance package taken.

Now Group UK Ltd trading as Exceptional AV operates under a Consumer Credit Licence, No. 560813.
This licence is issued by The Director General of Fair Trading at the Office of Fair Trading in accordance with the Consumer Credit Act 1974.

Denon AVR-X3200W w/ Monitor Audio Bronze 5 (5.1)

Availability: Usually dispatched

Availability: In stock

Regular Price: £2,239.00

Special Price £1,590.00

Save £649.00 Regular Price: £2,239.00

Special Price £1,590.00 inc vat

Featured
Brands

Our Awards

We're Geeks and Proud of It!

Yep, it's true! We know our fruit from our banana plugs, we love what we sell and we actually know what we sell.

We also answer the phone (yes – you can talk to us!) and we’re proud to say we have the best selection of geeks from the industry who love to help you. We care about our customers and getting stuff right.

Yep, we actually answer the phone!

We understand this is a rarity these days, but it really is true!

Freephone: 0800 634 4484
From abroad: +
44 1628 778885
From a mobile: 01628 778885

Live Chat
You can chat to our team live on the website by clicking on the chat window located bottom right of the page.
 

  Phone Lines Open
Monday to Friday 9am to 6pm
Saturday 9am to 5.30pm
Sundays and Bank Holidays Closed
Christmas Eve 9am to Noon
New Year's Eve 9am to 4pm

Next working day delivery is available on all in-stock items. All deliveries over £50 are fully traceable and most of our deliveries give you text message alerts!

 

 

Up to 90 Day Returns!

Returns are easy and flexible. We will accept returned goods up to 90 days from purchase with the following restrictions as summarised below. For more details please read our Terms & Conditions of Sale, a link is shown at the bottom of the home page.

Changing your Mind
It's OK to change your mind but please be aware that all goods must be returned in as new, unused and re-saleable condition. This means that all packaging must be intact, all accessories are complete in their original wrappers and any free items are also returned with the goods. Essentially the product must be returned in the same condition as you would expect to receive a new unit in. In all cases the cost of returning the goods will be the customer's responsibility. All faulty items must be returned complete and will be repaired under the manufacturer's warranty.

 

How we Handle Returns
Depending on how long you have had the goods there are different options availble to you. In the case of faulty items, if the item fails due to a manufacturing fault between 1 and 28 days from delivery we will exchange it for a brand new one of the same model. Any items which are found faulty after 28 days from delivery will be repaired under the manufacturers warranty. For returns where you have changed your mind, please find our policy below:

Returns

Exchange
This is were you return your item and we will exchange it for another item of equal or higher value. If the item you wish to change to is of higher value you only pay the difference. If the item is of a lower value we will issue you with a credit note for the difference which you can spend with us at a later date.

Credit Note
This is where you return your item and we issue you with a credit note which you can use against another purchase with us.

Refund
This is where you return your item and we issue a refund back to the same method you paid with. e.g. the same credit card. This is not available after 14 days, only exchange or credit note is available after 14 days.

25% Restocking Fee
If your item is returned to us between 29 and 90 days from delivery we will charge a restocking fee of 25% of the price you paid for the item initially. This will be deducted from the value of the exchange or credit note which is issued to you. This is because  technology in the AV marketplace moves fast, and as a result the value of items decrease very quickly.

Please note we do not accept returns after 90 days, except for repairs under warranty.

To complete your order please call us on 0800 634 4484
9am to 6pm Mon-Fri, 9am to 5.30pm Sat.

Thank you!

0