0800 634 4484
Mon-Fri 9am-6pm  |  Sat 9am-5.30pm
Denon AVR-X6200W w/ Q Acoustics Concept 40 Speakers (5.1)

Denon AVR-X6200W w/ Q Acoustics Concept 40 Speakers (5.1)

Denon AVR-X6200W with Q Acoustics Concept 40 (5.1) Speaker Package - Includes Cable Bundle worth £143.99

EAN: 4951035056745

Man. Part No.: AVR-X6200W

Denon AVR-X6200W w/ Q Acoustics Concept 40 (5.1) 

Denon AVR-X6200W w/  Q Acoustics Concept 40 Speakers (5.1)



Denon AVR-X6200W AV Receiver 

Denon AVR-X6200W AV Receiver

Enjoy a striking surround sound audio experience with the Denon AVR-X6200W, which features Dolby Atmos and DTS:X surround decoding. Both Dolby Atmos and DTS:X feature object-based surround sound with the ability to drive overhead speakers to deliver the ultimate immersive 3D audio experience. With an advanced video processing and switching section, the AVR-6200W features full 4K Ultra HD connectivity, HDMI ver 2.0a and HDCP 2.2 compliance.


The powerful amplifier section features custom made discrete monolithic amplifiers with DHCT (Denon High Current Transistors). Rated at 205 watts per channel, the AVR-X6200W has the ability to drive lower impedance 4 ohm speakers on all channels.


Equipped with built-in Wi-Fi and Bluetooth with dual diversity antennas, the AVR-X6200W lets you listen to your favourite music from streaming services including Spotify Connect, and you can listen to any of thousands of internet radio stations. You can also stream your favourite tracks wirelessly from your iPhone, iPod touch and iPad via AirPlay.



- 205W x 9ch high quality discrete power amplifier for powerful and detailed sound
- Monolithic amplifier design with Denon custom made transistors
- D.D.S.C.-HD Digital and AL24 Processing Plus; Denon Link HD
- Built-in WiFi with dual diversity antenna, built-in Bluetooth
- 11.2ch processing; 13.2ch pre-out; 3 multiroom zones
- Built-in Dolby Atmos (up to 7.1.4, 9.1.2 with external 2ch amplifier); DTS:X ready (via firmware update later in 2015)
- Auro-3D upgradeable (up to 10.1ch with external amplifier; a fee is charged)
- Latest HDMI standard with 4K/60Hz full-rate pass-through on all inputs, 4:4:4 resolution, HDR, BT2020
- 8 HDMI inputs (1x front) and 3 HDMI outputs with full HDCP 2.2 support
- Advanced Video Processing with scaling of lower resolution signals up to 1080p and 4k Ultra HD
- Wide support for streaming formats including high resolution DSD, FLAC and AIFF
- AirPlay and DLNA music streaming; Spotify Connect (where available); Internet Radio
- Audyssey MultEQ XT32 (Pro ready), Sub EQ HT and Audyssey LFC; Audyssey Dynamic Volume and Dynamic EQ
- Gold-plated terminals
- Setup Assistant in 9 languages; Easy to setup, easy to use
- Advanced ECO mode with off/on/auto setting
- Available in black and premium silver

Built-in Bluetooth & Wi-Fi

Featuring Bluetooth & Wi-Fi wireless streaming connectivity, the AVR-X6200W is equipped with an advanced dual antenna RF transceiver system for robust and error-free streaming, even in congested urban environments. Connect to the internet through your home Wi-Fi network (or with a hard-wired connection via the RJ-45 Ethernet LAN port) and enjoy your favourite tracks from streaming music services such as Spotify Connect. You can also choose from thousands of internet radio stations around the world, and enjoy music from virtually every genre. With AirPlay, you can enjoy listing to your favourite tracks wirelessly from your iOS device, including the iPod touch, iPhone and iPad, and the AVR-X6200W is also DLNA 1.5 certified for compatibility with your home PC or Mac. The Denon AVR Remote App lets you easily control the AVR-X6200W with your favourite portable device and it’s available for both Apple and Android devices.


Latest HDMI Connectivity; HDCP 2.2 Compatible; Video Scaling; ISF Certification

Equipped with 8 HDMI inputs, including 1 conveniently located on the front panel, along with three HDMI outputs, the AVR-X6200W incorporates an advanced video processor that features support for 4K Ultra HD 60 Hz full rate video, 4:4:4 Pure Color subsampling and 21:9 video pass-through, along with support for 3D content, HDR and BT.2020. The AVR-X6200W also features HDCP 2.2 compatibility on all HDMI inputs, a requirement for 4K Ultra HD copy-protected content. And, the video processor can also upscale analogue and digital SD and HD video to 4K Ultra HD. Certified by the Imaging Science Foundation, the AVR-X6200W features a full suite of video calibration controls (for use by an ISF technician), along with ISF Day and ISF Night video modes.


Dolby Atmos Built-In; DTS:X Ready

Dolby's new Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the sound designer the ability to precisely place sounds anywhere in the 3-dimensional space. Now, you can enjoy this same award-winning technology at home with the AVR-X6200W, which features the ability to connect a 5.1 surround sound speaker system and 4 additional overhead speakers or 4 additional Dolby Atmos elevation speakers for the ultimate home theater experience. Thanks to the 11ch processing capability, you can just add an external 2-channel amplifier and even enjoy a thrilling 7.1.4 or 9.1.2 channel Atmos experience. Along with Dolby Atmos decoding and Dolby Surround Upmixing, the AVR-X6200W also features Dolby TrueHD lossless decoding and other Dolby Digital technologies.

The latest immersive surround sound system, DTS:X, features object-based audio coding that lets the sound designer place sonic elements anywhere in the 3D acoustic soundspace, and provides for overhead speakers to deliver a stunning surround sound experience, and the AVR-X6200W also features DTS-HD Master Audio and other DTS technologies. DTS:X and DTS Neural:X Upmixer will be enabled through an online firmware update coming later in 2015. For more info, please visit www.denon.com/dtsx.


Auro-3D Upgradeable

By fully immersing the listener in a cocoon of life-like sound, Auro-3D puts you right in the middle of the action. Auro-3D provides an immersive surround sound experience thanks to dedicated height and overhead channels, in addition to the regular channels. The height information, captured in recording or created during the mixing process, is mixed into a standard 5.1 PCM stream that comes with a regular Blu-ray. Moreover, the Auro-3D Engine combines different technologies to guarantee an optimum 3D sound experience generated both natively and from existing audio content. It recognizes mono, stereo, 5.1 surround or an Auro-encoded signal and transforms them into 3D audio. Once upgraded with the Auro-Codec decoder, the Denon AVR-X6200W is capable of decoding the original Auro-3D mix and playing back an Auro-3D 10.1 channel configuration (with external amplifier). Auro-3D upgrade availability and pricing to be announced.


Powerful 9 Channel Discrete Amplifier with Eco Mode

With each channel rated at a maximum power of 205 watts, the AVR-X6200W features a monolithic power amplifier design with Denon custom made transistors and identical circuit topology on all 9 channels. Our new Eco Mode provides the ability to reduce overall power consumption and features an on-screen Eco Meter that lets you see the power consumption reduction effect. The Auto Eco mode automatically switches between normal and Eco modes, depending on the volume level chosen, and the power amplifier block is rated to drive low impedance speaker loads, down to 4 ohms, for compatibility and stability with virtually any loudspeaker model.

Powerful DSP

In order to properly handle the multitude of advanced digital audio decoding and processing functions, the AVR-X6200W features an sophisticated DSP audio processing system that incorporates no less than 4 powerful high speed fourth generation SHARC DSP processors, which together have a combined continuous processing capability of 10 GFLOPS (10 billion floating point numerical computations per second).


Audyssey MultEQ XT32 (Pro ready)

The AVR-X6200W features the Audyssey MultEQ XT32 suite of DSP functions, which includes room equalisation, Dynamic EQ and Dynamic Volume. Audyssey MultEQ XT32 automatic room acoustic measurement and correction system matches your speakers to your room’s acoustics, for the smoothest, most natural tonal balance. Audyssey Sub EQ HT allows proper integration of two subwoofers in their home theater systems for rich, full bass that covers a wide listening area. Audyssey Dynamic EQ uses advanced psychoacoustic algorithms to continually adjust tonal balance so that the sound you hear is full range, even at lower volume levels, and Audyssey Dynamic Volume smoothes out annoying volume jumps, especially with loud commercials. Audyssey LFC prevents bass from passing your walls and disturbing your neighbours while maintaining the bass performance in the listening room. The AVR-X6200W is also Audyssey Pro ready for the most advanced professional room correction.


Denon Link HD; AL24 Processing Plus

When connected to a compatible Denon Blu-ray player, our exclusive Denon Link HD system provides a dedicated pathway for the critical timing data to eliminate distortion caused by jitter errors in the main data stream. Denon’s exclusive AL24+ audio processing provides ultra high resolution digital audio filtering and precision tailoring of the main (L/R) audio channels, to deliver shimmering detail in the highs, along with smooth natural midrange and a broad soundstage with improved imaging.


Multiroom / Multisource

The AVR-X6200W lets you enjoy a program source in the Main Zone (the room where the AVR-X6200W is located) and in Zone 2 and Zone 3. The source can be the same for all zones, or you can enjoy different sources in those zones if you prefer. The sources for the zones can be either analogue or 2 channel digital PCM sources (incl. optical, coaxial, HDMI and network).


Smart TV Connectivity

Via the HDMI CEC (consumer electronics control) functionality in your Smart TV, you may be able to control your Denon AVR with the Smart TV's remote control. With “HDMI control” set to ON in your receiver, you can set “Smart Menu” to ON to start controlling your Denon AVR with your Smart TV's remote. The Smart Menu home screen provides you quick access to source and surround mode selections, the AVR’s setup menu, and 4 Quick Selects.


Easy To Setup, Easy To Use

Featuring a clear, easy to understand graphical on-screen display, the AVR-X6200W guides you through the setup process that ensures the right configuration the very first time. Our exclusive Setup Assistant and the included Quick Start guide together provide easy setup guidance, optimizing critical settings for the best possible sound quality with your particular equipment configuration.


Dual Subwoofer Outputs

With a single subwoofer, optimum placement within the room for the best bass response isn't always possible. Depending on the location, bass response at the main listening position can be uneven with audible peaks and dips. With 2 subwoofers positioned in different locations, response averaging evens out the low bass range for more accurate bass anywhere in the listening area.


Color Coded 4-Way Speaker Terminals

The high quality speaker terminals feature multi-way connection capability to handle a number of speaker cable terminations including banana plugs. They're also color coded for correct hookup the very first time and color coded speaker cable labels are included.


Convenient USB Port

The convenient front panel USB port stream tunes directly from your iPod touch, iPhone and iPad and charge your device at the same time. You can also connect a USB drive and listen to MP3 and WAV files, and the AVR-X6200W features high resolution audio file compatibility, including DSD (2.8 MHz) and FLAC lossless decoding up to 24-bit/192-kHz.


Easy To Use Quick Select Functions

There are 4 Quick Select function buttons on the front panel and the remote control. These let you choose your favorite sources and each one remembers your preferred sound mode for that source.


Denon HEOS Link IP Control

Denon's acclaimed HEOS whole home audio system features advanced multi-room, multi-source audio streaming, and the AVR-X6200W features IP control capability with the HEOS Link, so you can control the receiver with the HEOS app.


External Control Capabilities

The AVR-X6200W is equipped with a range of features that provide enhanced control capabilities and compatibility with 3rd party and custom integration solutions. For remote control compatibility with other components in your home theater system, the AVR-X6200W features an IR (infrared) remote control input and remote control output on the rear panel, along with dual 12V trigger outputs.

The AVR-X6200W can also be set up and operated by a home computer on the network via IP control, either via wired LAN connection or via Wi-Fi wireless connection. For direct connection to external home automation and control equipment, the AVR-X6200W is equipped with an RS-232C serial port.

Q Acoustics Concept 40 Cinema Pack

Q Acoustics Concept 40 Cinema Pack


Since the beginnings of ‘Hi-Fi’ over fifty years ago, it has been known that loudspeaker cabinet resonance is a major factor limiting a hi-fi system’s sonic performance. Fortunately it is very easy to overcome; you simply have to spend a very large amount of money designing and constructing heavy, dense, high mass cabinets with lots of internal bracing. The result should be excellent, but very expensive, ‘high end’ loudspeakers. In fact the difference between speakers that are rated merely as ‘good’ and those accepted to be truly excellent ‘high end’ models, is their level of cabinet resonance. Q Acoustics Concept Series changes everything.


GelcoreTM Construction is in effect a ‘cabinet within a cabinet’, with a special resonance cancelling compound adhering between the inner and outer shells. This cabinet is both very rigid and exhibits extremely low resonance. The latter being achieved because the resonance-cancelling compound absorbs the kinetic energy (movement) generated within the cabinet by the drive units, which is then dispersed by converting it into heat.


Q Acoustics Concept 40 Speakers


"Surprising sonic agility and composure …. a wonderfully inviting sound"

What HiFi? March 2014

Q Acoustics Concept 40 Speakers

The Concept 40 is Q Acoustics’ flagship floorstanding speaker. It is the newest addition of the acclaimed award winning Concept range, and we are highly confident about its ability to deliver unparalleled sonic performance at its price. We strongly believe that these HiFi speakers set new standards, and can even outperform those that are in a much higher price bracket.

In common with the Concept 20 its award-winning ‘little brother’, the new Concept 40’s unparalleled soundstage, dynamics and sheer musicality is achieved by incorporating outstanding, bespoke drive units into a lacquered, State-of-the-Art, ‘GelcoreTM Construction’, ultra-low resonance cabinet, which ultimately allows them to perform at its very best. The drive units have powerful oversized magnets attached to them to lower the cabinet resonance and the tripod stand allows these floorstanding loudspeakers to have perfect rigidity and contact with the floor to enhance its performance.



The aluminium facia plate not only enhances the aesthetics of them, but also helps to reduce cabinet resonance as it features a butyl clamp. With a sensitivity of 90dB, and a speaker imprudence that never get s lower than 4 ohms, it means that the Concept 40 is easy to drive with any good quality amplifier. With a striking floorstanding design which is available in either high gloss black, or high gloss white, these loudspeakers really do look as good as they sound.


Speaker Specifications

Enclosure type: 2-way reflex with double woofer
Bass Unit: 2 x 125mm
Treble Unit: 25mm
Frequency Response: 53Hz - 22kHz
Nominal Impedance: 6ohm
Minimum Impedance: 4ohm
Sensitivity: 90dB
Recommended Power: 25 - 150w
Crossover Frequency: 2.3kHz
Dimensions H/D/W mm: 972 x 288 x 170
Weight: 18.5kg
Sold in: Pairs
Finishes available: Lacquered Black Gloss / Lacquered White Gloss

5 Years


Q Acoustics Concept 20 Speakers

"It's amazing how much difference the new cabinet makes - these speakers are in a different league"
What HiFi Magazine, May 2013



Q Acoustics is proud to introduce the new Concept 20 Loudspeaker.


The 'Concept 20' is a special loudspeaker which goes beyond anything that Q Acoustics has achieved before. It's a beautifully styled product which we confidently believe delivers a level of sonic performance previously thought impossible at its price point."

To achieve this extraordinary performance, Q Acoustics' design team applied scientific methodology and advances in technology to address the problem of cabinet resonance; long recognised as the single biggest hurdle preventing speaker designers delivering true 'high end' performance at a reasonable price.


What is Gelcore

The 'Concept 20' proves cabinet resonance need be a problem no longer.

Incorporating a 'cabinet within a cabinet' design, its inner and outer enclosures are bound together by a bespoke adhesive which never quite sets. This configuration (known as Gelcore™ construction) allows the kinetic energy generated by the drive units within the cabinet to be dispersed as heat and preventing them colouring and degrading the speaker's musical output. The 'cabinet within a cabinet' Gelcore™ construction dramatically reduces resonances and colouration.

Combine this new cabinet design with the Concept 20's advanced, high dynamic, low distortion drive units and the result is a loudspeaker which, at its price, is nothing short of sensational."


Sonically Matching Floorstand

To optimise sonic performance, we have also incorporated Gelcore(TM) Construction into a unique, visually striking and resonance-free matching floorstand for the new loudspeaker. The beautiful Concept 20 speakers and high performance stands come in a choice of either Gloss White or Gloss Black, lacquered finishes.

*When compared to a good conventional cabinet, radiated power (colouration) throughout the critical mid-band (voice frequencies) reduces by an average of more than -6dB. In the high and low frequencies the effect is even greater, with improvements in excess of -10dB.




Enclosure type: 2-way reflex
Bass Unit: 125mm
Treble Unit: 25mm
Frequency Response: 64Hz - 22kHz
Nominal Impedance: 6ohms
Minimum Impedance: 4ohms
Sensitivity: 88dB
Recommended Power: 25 - 75w
Crossover Frequency: 2.9kHz
Dimensions H/D/W mm: 260 x 280 x 170
Weight: 5.6kg

Q Acoustics Concept Centre Speaker

Q Acoustics Concept Centre Speaker

The Concept Centre is the heart of the Concept Cinema System. This new loudspeaker boasts a precisely optimised implementation of the revolutionary 'Gelcore' cabinet technology developed for the ground breaking Concept 20 and Concept 40 models. The result is a centre channel speaker that delivers astonishingly clear and dynamic dialogue.

Both 5.1 and 7.1 systems can be configured from the other speakers in the concept range combined with our 2070i sub. In addition, if an installation requires overhead speakers (Dolby Atmos or DTS:X), we recommend the use of the Q Acoustics Install Performance In-ceiling range.


Speaker Specifications

Enclosure type: 2-way reflex
Bass Unit: 2 x 100mm
Treble Unit: 25mm
Frequency Response: 75Hz - 22kHz
Nominal Impedance: 6ohm
Minimum Impedance: 4ohm
Sensitivity: 88dB
Recommended Power: 25 - 75w
Crossover Frequency: 2.9kHz
Dimensions H/D/W mm: 150 x 198 x 430
Weight: 6.8kg
Sold in: Single
Finishes available: Lacquered Black Gloss / Lacquered White Gloss
Warranty: 5 Years

Q Acoustics 3070S Subwoofer

Q Acoustics 3070S Subwoofer


This powerful, 140watts rms, twin 170mm drive unit subwoofer will bring the full explosive majesty of blockbuster movie soundtracks into your living room.

Naturally, being a Q Acoustics design, it will also accurately reproduce the fast 'twang' and detail of a double bass or any other low frequency musical notes. That’s why Q Acoustics is your best choice for both music and movies.

The build quality of the new 3000 series is undeniable, such care and attention has gone into producing the perfect finish and it shows. 


Speaker Specifications

Enclosure type: Ported
Bass Unit: 2 x 170mm
Amplified Power: 140W rms
Crossover Frequency: 50Hz - 150Hz (var)
Dimensions H/D/W mm: 400 x 425 x 200
Weight: 13.6kg
Sold in: Single
Warranty: 2 Years

Additional Information

Promotion No
Manufacturer's Part No. AVR-X6200W
EAN 4951035056745
Amplifier Brand Denon
Amplifier Award No
HDMI Out 3
Amplifier Power 200
Number of channels 9,2
Dolby Atmos Yes
DTS: X Yes
Video Upscaling Yes
Connections 12v Trigger, Analog, Bi-Wire, Component, Composite, Digital Coaxial, Digital Optical (TOSLINK), Ethernet, FM/AM, HDMI, Headphone, IR Flasher, Multi-Channel Output, RS-232, S-Video, Subwoofer, USB
Features 3.5mm Mini-Jack, 4K Passthrough, Airplay, Audio Return Channel (ARC), Automatic Speaker Calibration, Bi-Wire, Bluetooth (In-Built), Digital Optical, DLNA, Dolby Atmos, DTS:X, Dynamic Volume Control, Ethernet, FM/AM, InstaPrevue, Internet Radio, MHL, Network (Internet), Remote Control App, Spotify, USB, WiFi (In-Built)
Speaker Type Floorstander
Number of Drivers N/A
Multi-Room Zones 3
Speaker Dimensions Fronts:1000 x 298 x 200/Centre: 160 x 203 x 430/Rears: 234.5 x 203 x 150/Subwoofer: 425 x 560 x 195 mm
Speaker Award No
Amplifier Dimensions (W x H x D) 434 x 383 x 167 mm
Warranty 2 yrs
Model AVR-X6200
you may also like...

Finance options* to help you afford the product you want!

If your order value is £389.00 or over you will be given the option to buy on finance when you reach the checkout. We have two finance options available:

Buy Now Pay 6 Months Later
Buy Now Pay 12 Months Later


Please Note: A minimum 10% deposit is payable up front on credit or debit card on all finance orders.

How to Apply

Applying for finance is simple. All you need to do is call us on 0800 634 4484 during opening hours and we will be able to process your order.

Who is the finance agreement with?

The finance agreement is with Hitachi Consumer Credit, one of the largest money lenders in the UK.

*Finance is available to UK applicants 18 years of age or older and subject to status. Finance is not available for business customers. Prices are correct at time of going to press and are subject to change during the term of this offer without notice. Terms and conditions are available on request. Finance agreements are available on orders between  £389 and £10,000 (including VAT and shipping). Please ensure you are able to keep up repayments of any finance package taken.

Now Group UK Ltd trading as Exceptional AV operates under a Consumer Credit Licence, No. 560813.
This licence is issued by The Director General of Fair Trading at the Office of Fair Trading in accordance with the Consumer Credit Act 1974.

Denon AVR-X6200W w/ Q Acoustics Concept 40 Speakers (5.1)

Availability: Usually dispatched

Availability: In stock

Regular Price: £3,491.99

Special Price £3,199.00

Save £292.99 Regular Price: £3,491.99

Special Price £3,199.00 inc vat


Our Awards

We're Geeks and Proud of It!

Yep, it's true! We know our fruit from our banana plugs, we love what we sell and we actually know what we sell.

We also answer the phone (yes – you can talk to us!) and we’re proud to say we have the best selection of geeks from the industry who love to help you. We care about our customers and getting stuff right.

Yep, we actually answer the phone!

We understand this is a rarity these days, but it really is true!

Freephone: 0800 634 4484
From abroad: +
44 1628 778885
From a mobile: 01628 778885

Live Chat
You can chat to our team live on the website by clicking on the chat window located bottom right of the page.

  Phone Lines Open
Monday to Friday 9am to 6pm
Saturday 9am to 5.30pm
Sundays and Bank Holidays Closed
Christmas Eve 9am to Noon
New Year's Eve 9am to 4pm

Next working day delivery is available on all in-stock items. All deliveries over £50 are fully traceable and most of our deliveries give you text message alerts!



Up to 90 Day Returns!

Returns are easy and flexible. We will accept returned goods up to 90 days from purchase with the following restrictions as summarised below. For more details please read our Terms & Conditions of Sale, a link is shown at the bottom of the home page.

Changing your Mind
It's OK to change your mind but please be aware that all goods must be returned in as new, unused and re-saleable condition. This means that all packaging must be intact, all accessories are complete in their original wrappers and any free items are also returned with the goods. Essentially the product must be returned in the same condition as you would expect to receive a new unit in. In all cases the cost of returning the goods will be the customer's responsibility. All faulty items must be returned complete and will be repaired under the manufacturer's warranty.


How we Handle Returns
Depending on how long you have had the goods there are different options availble to you. In the case of faulty items, if the item fails due to a manufacturing fault between 1 and 28 days from delivery we will exchange it for a brand new one of the same model. Any items which are found faulty after 28 days from delivery will be repaired under the manufacturers warranty. For returns where you have changed your mind, please find our policy below:


This is were you return your item and we will exchange it for another item of equal or higher value. If the item you wish to change to is of higher value you only pay the difference. If the item is of a lower value we will issue you with a credit note for the difference which you can spend with us at a later date.

Credit Note
This is where you return your item and we issue you with a credit note which you can use against another purchase with us.

This is where you return your item and we issue a refund back to the same method you paid with. e.g. the same credit card. This is not available after 14 days, only exchange or credit note is available after 14 days.

25% Restocking Fee
If your item is returned to us between 29 and 90 days from delivery we will charge a restocking fee of 25% of the price you paid for the item initially. This will be deducted from the value of the exchange or credit note which is issued to you. This is because  technology in the AV marketplace moves fast, and as a result the value of items decrease very quickly.

Please note we do not accept returns after 90 days, except for repairs under warranty.

To complete your order please call us on 0800 634 4484
9am to 6pm Mon-Fri, 9am to 5.30pm Sat.

Thank you!