0800 634 4484
Mon-Fri: 9.00-5:30pm  |  Sat-Sun: Closed
TEAC UD-503 USB DAC/Headphone Amplifier

TEAC UD-503 USB DAC/Headphone Amplifier

TEAC UD-503 Dual-monaural USB DAC that supports 11.2MHz DSD with built-in fully-balanced/parallel-unbalanced headphone amplifier

EAN: 4907034219438

Man. Part No.: UD-503

TEAC UD-503 Headphone Amplifier

TEAC UD-503 USB DAC/Headphone Amplifier

USB DAC/Headphone Amplifier

Dual-monaural USB DAC that supports 11.2MHz DSD with built-in fully-balanced/parallel-unbalanced headphone amplifier


The UD-503 is a dual-monaural USB DAC and fully-balanced headphone amplifier in a compact body with a footprint the size of a piece of paper. It represents the distillation of TEAC audio design expertise developed for over 60 years with audiophile design concepts.
The same dual-monaural structure, which is an audiophile design concept, as in the UD-501 is used. In addition, two AK4490 DAC chips which are the newest models made by Asahi Kasei Microdevices Corporation, enable native playback of the most advanced 11.2MHz DSD and 384kHz/32-bit PCM formats. Furthermore, analog output circuits could be called the cornerstone for audio quality, so we have now included four TEAC-HCLD circuits, which are current-enhancing output buffer amps. Operation is fully-balanced when using balanced XLR output and parallel-unbalanced when using unbalanced RCA output. We have realized a DAC section with expressiveness that exceeds the expectations of its class. The headphone amp, which shares the amp section with the line amp, has a discrete structure. Two TRS phone jacks are available on the front panel, and they offer powerful driving force when used as a fully-balanced or parallel-unbalanced headphone amplifier. In addition, the TEAC-QVCS high-precision volume control that provides 256 setting steps and the remote control enable use as a high-quality preamp. The UD-503 is the next generation of USB DAC/headphone amplifier that is leading desktop audio to the next level.

Main functions

- Two built-in AK4490 DACs made by Asahi Kasei Microdevices support resolutions up to 11.2MHz DSD and 384kHz/32-bit PCM
- Dual-monaural structure thoroughly separates independent left and right circuits from the power supply to the output stage
- Built-in preamp circuits are ideal for setting up systems with power amps and active speakers
- Analog RCA input pair enables use with analog sources
- In addition to fully-balanced operation, the headphone amplifier supports parallel-unbalanced and active ground headphone operation
- Our original TEAC-HCLD output buffer circuit, which is a current-enhancing output buffer circuit, conveys the dynamism of music
- Capable of upconversion up to 12.2MHz DSD and 384kHz PCM
- TEAC-QVCS high-precision volume control with a four-circuit structure allows 256 setting steps
- In addition to high-precision internal clocks, 10MHz external clock input is also supported
- Full-metal body with three independent pinpoint feet realizes high vibration suppression and stability




- USB DAC that supports 11.2MHz DSD and 384kHz/32-bit PCM
- Dual-monaural circuit structure used from the power supply to the digital and analog sections
- Both left and right channels have their own high-end AK4490 DACs, which are made by Asahi Kasei Microdevices Corporation
- Two high-capacity toroidal core power transformers—one each for left and right channels
- Isolation circuit that completely separates the digital and analog sections electrically
- 4 TEAC HCLD buffer amplifiers, which are current-enhancing output buffer circuits, are used for the line amplifiers
- Upconversion to formats up to 12.2MHz DSD and 384kHz/32-bit PCM using an FPGA (programmable IC) that utilizes a fluency function
- Two types of DSD filter and four types of PCM digital filter, as well as an OFF mode
- 10MHz external clock input supported (available during USB asynchronous transmission)
- Two high-precision internal clocks—one each dedicated to 44.1kHz and 48kHz signals (available during USB asynchronous transmission)
- One pair of RCA analog unbalanced inputs
- Volume output can be set to fixed, fixed +6dB or variable for the one pair of XLR analog balanced outputs and one pair of RCA analog unbalanced outputs
- XLR jack polarity can be set (2 HOT or 3 HOT)
- TEAC QVCS high-precision volume circuit
- Large digital volume display with excellent visibility and remote control with one-button operation of various functions
- OELD display shows input signal type and various settings (with 3-level dimmer and off functions)
- Fully-balanced drive headphone amplifier with discrete construction and maximum output of 700 mW + 700 mW
- Headphone amplifier can be switched among 3 drive types: unbalanced, balanced and active ground
- Digital inputs on the back include one USB, one coaxial and one optical
- Combined coaxial mini/optical mini digital input connector on front is convenient for digital input from portable devices
- Low power consumption design and automatic power saving function meet modern expectations
- The full-metal body realizes both vibration control and elegant style in an A4-size body that enables placement on a desktop
- TEAC original design for three-point support using pinpoint feet with attached bases
- Compliant with RoHS

High-performance VERITA AK4490 DACs support 11.2MHz DSD and 384kHz/32-bit PCM
For DAC chips, which are the keys to digital audio, we have used VERITA AK4490 DACs, which are made by Asahi Kasei Microdevices Corporation and have an established reputation for use in high-end audio equipment.* The VELVET SOUND architecture provides the fine expressive capability suitable for the playback of high-resolution audio sources that reproduce sound waves outside the human audible range. Furthermore, a newly developed low distortion technology enables performance of S/(N+D) = 112 dB. This is the best level in the industry for a 120dB class DAC.
Not only is native playback with direct processing of 11.2MHz DSD signals possible, support is provided for an even greater variety of high-resolution audio sources, including 384kHz/32-bit PCM digital input. We have realized expression of the fine smooth detail and outstanding sense of sound placement that characterize high-resolution audio sources.
*The AK4490 is a product in the Audio4pro™ family brand developed by Asahi Kasei Microdevices Corporation for professional audio equipment and high-end digital audio applications.

Dual-monaural structure supports fully-balanced transmission and realizes further advancement
Behind the expressiveness of the UD-503, which exceeds the level expected of its class, is an indulgent dual-monaural circuit structure that encompasses every aspect from the power and D/A sections to the analog output stage.
Starting with the toroidal core power transformers, which feature the ability to supply stable current, and the high-performance VERITA AK4490 DACs, the dual-monaural structure has a complete mono circuit for each channel. This prevents the signals from interfering with each other as much as possible. Interference is suppressed between the left and right channels, which is particularly important for headphone listening, so this unit can also be used as a high-performance headphone amplifier.
Furthermore, by processing the output signals of each channel completely with a differential from immediately after D/A conversion to the final output stage, common mode noise is removed and the sense of air that high-resolution audio has is not lost in transmission during balanced output.

In addition to 44.1kHz and 48kHz internal clocks, 10MHz external clock input is also supported 
When connected by USB, rather than synchronizing with a computer clock that is unstable and noisy, the UD-503 supports asynchronous USB transfer mode, allowing it to control PCM and DSD signals by synchronizing with its own clock generated by its built-in high-precision crystal oscillator. Two dedicated internal clocks running at 44.1kHz and 48kHz are built in. By applying clock from an audio grade high-precision crystal oscillator, which features low phase noise, to input signals which that sampling frequency are whole number multiples, the effect of jitter on audio quality can be largely suppressed and the audio source can be reproduced faithfully.
In addition, with support for 10MHz external master clock input, synchronization with master clock signals of even higher precision is possible. By synchronizing with clock that has an even higher precision, you can enjoy changes in tone quality and improved audio quality that can be felt physically.

DSD up-conversion function using a custom chip
Using an FPGA (programmable IC) of our own design that utilizes a fluency algorithm to smoothly augment digital audio signals, in addition to the 2x, 4x and 8x upconversion of PCM digital signals, DSD up conversion is also supported. Using this, you can easily experience the dense sense of air that DSD files have even when listening to CDs from your collection.
You can upconvert 44.1kHz/16-bit audio files ripped from CDs up to 11.2MHz DSD format files, which have about 256 times the amount of data as the original CD files. 48kHz PCM audio files can be played back in 12.2MHz DSD format. 

Four types of PCM digital filter and two types of DSD filter 
In addition to four types of PCM digital filters and an OFF mode, the unit has two types of DSD digital filters, so you can choose the best filter for the input file format and type of music. You can enjoy the subtle sound nuances of different filters without needing to connect different USB DACs.

PCM filters

- FIR SHARP: An FIR filter with a steep roll-off sharply cuts signals outside the audio band.
- FIR SLOW: An FIR filter with a slow roll-off gently cuts signals outside the audio band.
- SDLY SHARP: A short delay filter with a steep roll-off sharply cuts signals outside the audio band.
- SDLY SLOW: A short delay filter with a slow roll-off gently cuts signals outside the audio band.

DSD filters: 
- CUTOFF 50kHz and CUTOFF 150kHz

NOTE: When receiving signals at 352.8 kHz or 384 kHz, the digital filter will be disabled during playback regardless of this setting.

Isolation circuit that completely separates the grounding of the digital and analog sections
Between the digital and analog sections, the circuit design uses a digital isolator to completely isolate both the power supply and the ground. So, all noise coming from digital input sources, starting with noise from the computer via USB, is prevented from entering the analog section by way of the power line or the ground. An isolation circuit offers significant benefit particularly when playing high-resolution audio sources with high sampling rates. The UD-503 is the first product in our Reference Series to include one.

Independent high-capacity toroidal core power transformers for left and right channels
Both left and right channels each have one dedicated high-capacity toroidal core power transformer that supplies stable current. This is also a continuation of supplies stable current. This is also a continuation of the dual-monaural design and enables the stable supply of current to each channel without being influenced by the changes in current consumption due to processing of the other channel's signal. Even thought it is small, we have incorporated approaches that are used in much larger high-end audio devices.

Our original TEAC-HCLD output buffer circuit, which is a Current-Enhancing Output Buffer circuit
In order to transfer music signals to output devices without losing their great dynamic range, we have included TEAC-HCLD (High Current Line Driver) circuits. These increase the current transfer capability that is crucial for analog output circuits. We have applied the expertise that we have gained in the design of audiophile equipment, and for each channel side included two buffer circuits with high current transfer capabilities. By using differential drive for balanced output and parallel drive for unbalanced output, we have increased current transfer capabilities, allowing the transfer of music signals without losing their dynamism.
Preamp circuits now use TEAC-QVCS high-precision volume control with a four-circuit structure
The UD-503 can also be used as a preamp. One pair of XLR balanced outputs and one pair of RCA unbalanced outputs and included and can be set to either an adjustable or a fixed volume level, allowing a simple system to be put together in combination with a power amplifier or active speakers. We have even considered connection of record players such as the TEAC TN-300 turntable, cassette decks and other analog sources with line outputs by also including one pair of analog RCA inputs.
For the preamp circuit, we have utilized the TEAC-QVCS (Quad Volume Control System), which is a circuit with a fully-balanced design that uses balanced processing of the audio signal at every stage from immediately after conversion from digital to analog until it reaches the volume amplifier.
Control signals transmitted from the volume knob simultaneously adjust the variable gain amp type volume controls for a total of four independent circuits—positive and negative for both of the left and right channels. Using this system, the unnecessary manipulation of audio signals is eliminated, and the left/right and positive/negative independence of the audio signals is preserved, achieving clear sound quality with outstanding channel separation. (This does not apply when using unbalanced analog input.)  This volume control system realizes 256 steps of volume adjustment in 0.5dB increments over the complete range from −95 dB to +24 dB. Precise volume adjustment has been made possible using a remote control, which is difficult using motorized analog volume. In addition, optimal volume levels can be achieved for headphone listening, which requires precise volume adjustment, using headphones with various levels of efficiency.

Volume display using OELD has excellent visibility
The organic electroluminescent display (OELD) with a 4-level dimmer provides high contrast and excellent visibility. A large font is used to enable listeners to check the volume even from distant positions.

Headphone amplifier with discrete construction supports balanced drive headphones 

The connection of balanced drive headphones is enabled by also using for headphone output TEAC HCLD circuits that are for line output and are composed of 4 output transistors each for both left and right channels. Furthermore, even during single end use, drive that is much stronger than an ordinary single end headphone amplifier is possible by making these transistors operate in parallel. In this unique circuit design, due to the AB class amplifier that greatly expands the A class operating range, A class operation is used for most of the range used in ordinary headphone listening. The potentials of various types of headphones can be brought out, starting with 600Ω high-impedance headphones. On the front of the unit, two 3-pole TRS (standard stereo) jacks are provided as headphone outputs. These can be switched between three types of drive operation. In addition to connecting balanced drive headphones, you can also use unbalanced drive to connect two pairs of ordinary headphones, as well as use active ground* drive, which can further decrease noise during silences and enhance the expressiveness of delicate sounds.

Introducing a new drive method for headphones: active ground drive 
The active ground method is a drive method that, using the same connection method as balanced connection, forcibly sets the COLD to stable 0V with an amplifier circuit that connects the COLD to the ground. Not only can a ground that is closer to the ideal be achieved than when using the general grounding method, this method has the effect of suppressing the influence of hum from the power supply. Since the noise floor is lowered and silence enhanced, the breathing of artists and the textures of sounds can be felt even more immediately.

The full-metal body realizes both vibration control and elegant style in an A4-size body that enables placement on a desktop
The construction of the entire body from metal panels that are effective against external noise suppresses the penetration of electromagnetic noise emitted by computers and other devices. This realizes a clean internal environment with low noise even when the surroundings are hostile to audio equipment. The metal chassis is also wrapped from both sides with 8mm-thick aluminum panels, and a center beam connects the front and rear of the chassis. These features prevent twisting and bending to realize a strong and stable body.
In addition, the footprint that is the size of a page* allows it to be placed on tables, sideboards and other small spaces. *Not including jacks, knobs and other protruding parts.

Symmetrically placed XLR output and RCA input and output jacks
The output jacks on the rear panel, including metal-plated XLR jacks for balanced output and RCA pin jacks for unbalanced output, have been symmetrically located for the shortest signal paths. The unit has been designed for connection with high-end equipment. For example, the left and right pin jacks have been placed with enough space between them to enable the connection of large-diameter RCA pin jacks. In addition, three digital inputs on the rear panel (USB, coaxial and optical) are complemented by one (combined coaxial/optical connector) on the front. Starting with 192kHz/24-bit using the coaxial and optical digital inputs, the input of 2.8MHz DSD using DoP and other high-resolution signals is supported. The digital input on the front is a combined coaxial mini and optical mini connector, making it simple to connect a TEAC HA-P90SD or other portable digital audio player capable of digital output. (A coaxial-3.5mm mini conversion cable is included.)

Three supportive pinpoint feet that allow easy installation
The three-point support method used for the legs enables stable body installation without influence from even the slightest surface irregularities. An original structure that unifies the spike-shaped foot with the mortar-shaped foot-stand is used for each leg. Vibrations and resonance are reduced by supporting the body of the unit on pinpoints. This thoroughly eliminates mid and low frequency heaviness and murkiness and realizes improved resolution, which brings out the details of sounds and sound placement. Each pinpoint foot used on the UD-503 is composed of the foot (top of photograph) itself that is attached firmly to the chassis, and a foot base (bottom of photograph). The base flange (the outer rim of the mortar-shaped part) hangs from the flanges of three screws. Due to this structure, the interlocking flanges prevent the feet bases from falling off or shifting when the body of the unit is lifted. When the unit is placed, each spike point touches only the single deepest point in the mortar-shaped part of its base. Although the pinpoint method has been called the ideal for audio equipment feet, complete installation had been extremely difficult. With this structure, we have made installation using this method simple.

TEAC HR Audio Player, which supports 11.2MHz DSD playback on both Windows and Mac, provided for free
11.2MHz DSD files can be played back easily using Windows or Macintosh computers without making complicated settings. The next-generation of high-resolution audio sources can be enjoyed immediately.
(When using a Windows computer, a separate driver must be installed.)

Additional Information

Promotion No
Manufacturer's Part No. UD-503
EAN 4907034219438
Amplifier Award No
Connections Analog, Digital Coaxial, Digital Optical (TOSLINK), Headphone, USB, XLR
Amplifier Power No
Number of channels No
Features Digital Optical, USB
Amplifier Brand TEAC
DAC Bits No
Number of Decks No
Speed No
Amplifier Dimensions No
Cd Player Dimensions No
Tuner Dimensions No
Unit Dimensions (WxHxD): 290 x 81.5 x 248.7 mm
Warranty 2 yrs

Finance options* to help you afford the product you want!

If your order value is £389.00 or over you will be given the option to buy on finance when you reach the checkout.
Please note that not all products are available on finance.

We have two finance options available:
Buy Now Pay 6 Months Later
Buy Now Pay 12 Months Later

Please Note: A minimum 10% deposit is payable up front on credit or debit card on all finance orders.

How to Apply

Applying for finance is simple. All you need to do is call us on 0800 634 4484 during opening hours and we will be able to process your order.

Who is the finance agreement with?

The finance agreement is with Hitachi Consumer Credit, one of the largest money lenders in the UK.

*Finance is available to UK applicants 18 years of age or older and subject to status. Finance is not available for business customers. Prices are correct at time of going to press and are subject to change during the term of this offer without notice. Terms and conditions are available on request. Finance agreements are available on orders between  £389 and £10,000 (including VAT and shipping). Please ensure you are able to keep up repayments of any finance package taken.

Now Group UK Ltd trading as Exceptional AV operates under a Consumer Credit Licence, No. 560813.
This licence is issued by The Director General of Fair Trading at the Office of Fair Trading in accordance with the Consumer Credit Act 1974.

TEAC UD-503 USB DAC/Headphone Amplifier

Availability: Currently Unavailable

Save £104.00 £699.00
£595.00 inc vat


Our Awards

We're Geeks and Proud of It!

Yep, it's true! We know our fruit from our banana plugs, we love what we sell and we actually know what we sell.

We also answer the phone (yes – you can talk to us!) and we’re proud to say we have the best selection of geeks from the industry who love to help you. We care about our customers and getting stuff right.

Yep, we actually answer the phone!

We understand this is a rarity these days, but it really is true!

Freephone: 0800 634 4484 
From abroad: +
44 1628 778885
From a mobile: 01628 778885

Live Chat
You can chat to our team live on the website by clicking on the chat window located bottom right of the page.

  Phone Lines Open
Monday to Friday 9am to 5.30pm
Saturday Closed
Sundays and Bank Holidays Closed
Christmas Eve Closed
New Year's Eve Closed

Next working day delivery is available on all in-stock items. All deliveries over £50 are fully traceable and most of our deliveries give you text message alerts!



Up to 90 Day Returns!

Returns are easy and flexible. We will accept returned goods up to 90 days from purchase with the following restrictions as summarised below. For more details please read our Terms & Conditions of Sale, a link is shown at the bottom of the home page.

Changing your Mind
It's OK to change your mind but please be aware that all goods must be returned in as new, unused and re-saleable condition. This means that all packaging must be intact, all accessories are complete in their original wrappers and any free items are also returned with the goods. Essentially the product must be returned in the same condition as you would expect to receive a new unit in. In all cases the cost of returning the goods will be the customer's responsibility. All faulty items must be returned complete and will be repaired under the manufacturer's warranty.


How we Handle Returns
Depending on how long you have had the goods there are different options availble to you. In the case of faulty items, if the item fails due to a manufacturing fault between 1 and 28 days from delivery we will exchange it for a brand new one of the same model. Any items which are found faulty after 28 days from delivery will be repaired under the manufacturers warranty. For returns where you have changed your mind, please find our policy below:


This is were you return your item and we will exchange it for another item of equal or higher value. If the item you wish to change to is of higher value you only pay the difference. If the item is of a lower value we will issue you with a credit note for the difference which you can spend with us at a later date.

Credit Note
This is where you return your item and we issue you with a credit note which you can use against another purchase with us.

This is where you return your item and we issue a refund back to the same method you paid with. e.g. the same credit card. This is not available after 14 days, only exchange or credit note is available after 14 days.

25% Restocking Fee
If your item is returned to us between 29 and 90 days from delivery we will charge a restocking fee of 25% of the price you paid for the item initially. This will be deducted from the value of the exchange or credit note which is issued to you. This is because  technology in the AV marketplace moves fast, and as a result the value of items decrease very quickly.

Please note we do not accept returns after 90 days, except for repairs under warranty.

To complete your order please call us on 0800 634 4484
9am to 6pm Mon-Fri, 9am to 5.30pm Sat.

Thank you!